MC-Fastkick
冬季施工必須快速完成

2020/11/12

使用 MC-Fastkick,可顯著加快混凝土的硬化過程。 此外,還可確保大幅縮短預鑄設備的周期,並縮短冬季施工的固化時間。 MC-FastKick 不僅可以加速混凝土硬化,更可以有效地液化。 對於具有 PCE 基底高效減水劑的混凝土,MC-FastKick 可進一步提高稠度與一致性。 這款促凝劑還提供混凝土非常好的加工性能,同時具有較高的早強度。

 

預鑄廠與冬季施工的絕佳優勢

MC-FastKick 為預鑄廠提供了絕佳優勢,因為可更快地支承釋放達到所需的強度,從而提高頻率。 對於 CEM I,最大加速作用的時間範圍為 6到12 個小時,對於 CEM II,大約為 8至16 小時,對於 CEM III大約為 10至20 小時。 因此,MC-FastKick 可大幅降低固化時間的效能,不僅適用於預鑄廠,且特別適用於冬季施工。

 

Shorter curing times and higher stripping frequencies

MC-FastKick has a positive effect on the crystal growth of the calcium silicate hydrate phases in concrete. This leads to increased early strength without negatively influencing the other concrete properties. MC-FastKick 111 can be used for concrete and reinforced concrete* and MC-FastKick 105 for concrete, reinforced concrete and prestressed concrete* and thus for almost all concretes.
Your contacts
Saki M. Moysidis, Head of PR & Communication

The mechanism of action of MC-FastKick gives the concrete a kick in the truest sense of the word, significantly accelerates the curing process and thus ensures greatly reduced cycle times in the precast plant and shorter curing times in winter construction.
The mechanism of action of MC-FastKick gives the concrete a kick in the truest sense of the word, significantly accelerates the curing process and thus ensures greatly reduced cycle times in the precast plant and shorter curing times in winter construction.
© MC-Bauchemie 2024
abs 123 abs 123 abs 123 abs 123 abs 123 abs 123 abs 123